...for multifiber ribbon cable that generally contains 6, 8, 12, or 24 fibers. It is defined by IEC-61754-7 and EIA/TIA-604-5-D, also known as FOCIS 5. The MPO connector, combined with lightweight ribbon cable, represents a huge technological advance...

...on 75-ohm BNC coax cable for transmission — the same cabling traditionally used for analog video communications. • SDI interfaces are standardized by the Society of Motion Picture and Television Engineers (SMPTE) and include: standard-definitio...

...required. Copper-wire cable can be video coax, miniature coax, or, most commonly, shielded twisted pair with a DB9 or HSSDC connector. Fibre choices include 62.5- or 50-µm multimode and 7- or 9-µm single-mode fibre, all with an SC connector. • Oth...

...data or optical fiber cable. It provides compatibility with existing 10BASE-T systems and thus enables plug-and-play upgrades from 10BASE-T. Fast Ethernet is sometimes referred to as 100BASE-X where X is a placeholder for the FX and TX variants • ...

...Distance • Wavelength • Cable • 10GBASE-SR • 300 m • 850 nm • Multimode • 10GBASE-SW • 300 m • 850 nm • Multimode • 10GBASE-LR • 10 km • 1310 nm • Single-Mode • 10GBASE-LW • 10 km • 1310 nm • Single-Mode • 10GBASE-LX4 • Multimode 300 m / • Single-Mo...

...in a rack with Filler Panels. • Cable Managers • Cable management is also an important consideration. Our Horizontal and Vertical Cable Managers help you to route cables along the sides of racks, between racks and to the rackmounted equipment. •  

...modems via RS-232 cable. Many remote access servers also support ISDN with either internal ISDN circuitry or through external terminal adapters. • The remote access server enables remote users to dial into the LAN via a modem connection and us...

...4-pair CAT5/CAT5e/CAT6 cable, leaving the other two pairs free to transmit power for Power over Ethernet (PoE) applications. However, Gigabit Ethernet or 1000BASE-T uses all four pairs of wires, leaving no pairs free for power. So how can PoE work ...